20% Discount on all Fun To Do SLA 3D Printing resins compatible with Formlabs and Peopoly Moai 3D printers!

Valid while stocks last.

3D printing resin Fun To Do F+.

F1+ Blend is the Fun To Do blend especially made for Formlabs Form1 and Form1+ printers.

The F1+ Blend is available in four colours: Clear, White, Grey and Black.
The F1+ is not only compatible with the machine but also with the Formlabs PreForm software. Just choose the appropriate colour and the V01 setting. Then Dial in the layer height. Because of the very high detail of the blend, especially the Black version, astonishing detailed results are achievable at 0.05 and 0.02mm layer height.

Finishing Instructions

1. To clean and remove excess resin, agitate the 3D printed part in an ulkltrasonic cleaner with TEK1969 cleaning or in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

3. Clean off any excess of liquid with a cold blowdryer or compressed air.

4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

5. Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

More information is available at FunToDo.