5.FTDSW.jpg

3D Printing resins, filaments and materials

Lumi Industries sells LumiReact 3D printing resins, Fep film, post processing products and filaments. Official Italian distributor of Fun To Do 3D printing resins .

FTD Dentifix-3D LR 3D Printing Resin

FTD Dentifix-3D LR 3D Printing Resin

โ‚ฌ88.00

FunToDo 3D printing resin for dental models on SLA/Formlabs 3D printers. 2 colors available.

Color:
Quantity:
Add to Cart

3D Printing resin FunToDo Dentifix-3D Low Reactivity.


A new resin for dental models by FunToDo.


A resin born from the collaboration of FunToDo with professionals  from the dental field.

The resin has a very smooth surface after printing and a great hardness that makes it ideal for dental models creation.

Its matt beige color makes details clear and facilitates laboratory work by eliminating annoying reflexes. Also available in matt grey.

This LR resin, Low Reactivity,  is compatible with SLA type 3D printers and Formlabs 3D printers.

3D printing resin FunToDo Dentifix LR characteristics

 Package                 1kg
 Applications    Dental models
 Color    Opaque, Sand Yellow RAL 1002 / Grey
 Viscosity       at 25°C      95 mPa.s
 Hardness (Shore D)    81
 Exposure Energy    18 mJ/cm2
 Max. cure depth    0.085
 Resolution    0.02-0.085 mm
 Tensile strenght    45 Mpa
 Elongation at break    5%
 Shrinkage    <0.2%

 

Although the properties in this table are accurate, Dentifix-3D can't make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.

Product properties can change without any prior notice.

 

Finishing Instructions

  1. To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

  5. Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

 More information is available at FunToDo.

Safe notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer's instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.